-
Tektronix TDS 524a
<p>Hi<br> Just looking for some advice. I recently purchased a TDS 524a scope without probes. I am trying to test it's functionality with a P6100&#160; but am unable to get a trace/signal from the probe calibration output. Is this dedicated to a P6139 probe? If I feed in an external test signal a trace is displayed correctly.<br> Thank you&#160;<br> JK</p>
오프라인 상태입니다. 이 페이지는 읽기 전용 버전 페이지입니다.
